Tenco is one of New Zealand’s largest exporters of forest products. We have built to this position since 1991 when the company was set up to export lumber to growing Asian export markets. Experience and reputation count; from small beginnings Tenco has become the largest independent exporter of New Zealand lumber and New Zealand’s 4th largest log exporter. Tenco has a regular shipping program of their own log vessels and in combination with these and other ships currently calls at 7 New Zealand ports (5 North Island and 2 South Island).
Tenco buys standing forests. Tenco currently has a number of forests which they purchased at harvestable age to log over a number of years for export and domestic markets. Tenco also regularly buys smaller tracts of forest to harvest immediately or immature forests to hold until harvest time. Tenco is interested in broadening the base of owners from whom it purchases forests and stands of trees. A deal with Tenco is a certain transaction. The owner and Tenco will agree on a value of the tree crop and then Tenco will pay this amount to the owner either in a lump sum amount or on rate per volume unit out-turn from the forest depending on the nature of the tree crop.
Tenco knows there are a lot of farmers who have trees that are close or ready to harvest and will be asking themselves how they should proceed with the sale of their trees. For some farmers the kind of certain transaction with money in the bank could well be appealing. Tenco is actively interested in buying harvestable forests or trees from areas including all the North Island (except the Gisborne and East Coast districts) and Nelson & Marlborough in the South Island .
If you own a forest in this area (16 years and older) and are ready to enter into this kind of agreement Tenco is interested to develop something with you.
Please contact: Josh.Bannan@tenco.co.nz
Work: +64 7 357 5356 Mobile: +64 21 921 595 www.tenco.co.nz
Radiata pine wood quality
Friday, June 20, 2014, Denis Hocking's blog
Radiata pine may be an easy and productive timber species for us to grow, but it has long been recognised that the timber does have a number of quality problems. These have been compounded by genetic improvement programmes that focused almost entirely on growth rate and tree form, (hence GF, Growth & Form). There was a reason for this - it allowed growers to be rewarded with bigger volumes and better, visually assessed log grades. However it has left us with a forest estate with questionable, and perhaps even more important, very variable, wood quality.
The Wood Quality Initiative was launched to tackle these problems in 2003, and the work continues under the alternative monicker of Solid Wood Innovation. Recently a Scion workshop was held in both Christchurch and Rotorua to discuss progress and continuing problems. The basic wood characteristics of radiata pine have been understood for over 50 years, particularly the problems of the juvenile core where the first 10-12m growth rings are lower wood density, less stiff and potentially unstable because of spiral grain.
To date most work has been done on sonic testing for stiffness in structural timber, which allows segregation of timber at any stage from the plantation through to the back of the saw mill. The tech- nology is now being used quite widely, but I have yet to see it on any skid site near here. We also need to think about the implications of further log segregation for smaller, farm forestry scale, harvest volumes. Stiffness correlates with both wood density and the microfibrillar angle of the cellulose in the cell wall. What the scientists are still struggling with is technology to predict timber stability after drying.
If you want to grow structural timber you really need a lower fertility, warmer site, (Northland not Southland) with higher stocking rates and longer rotations. But even at best our radiata pine is not a particularly good structural timber, both the Aussies and the Chileans produce better, stiffer radiata pine and European pine is making increasing inroads into the Australian market with better stiffness and stability. So many experts still favour clear wood and appearance grades as our best value adding option. Our radiata pine generally does have good machining, finishing and appearance characteristics.
With clear wood density and stiffness are not major issues, though apparently some customers do specify particularly densi- ties. Tenon, our biggest clear wood processor presented an excellent paper, identifying their wood quality problems. There are two biggies for them – resin pockets and intra-ring checking. Resin is strongly affected by environment with various factors being blamed, such as drought stress, wind and boron deficien- cy. Problems can be predicted from checking the ends of logs and if it is a problem in your forests don’t expect the clear wood processors to come calling. Intra-ring checking can also be assessed by looking for “green” checks in log ends, though they often resort to wood samples or trial loads from suspect sources.
Age is one factor here, they do not take logs younger than 25 years, but there is some confidence that this problem will reduce or even disappear in the future after the culling of some suscepti- ble genetic material.
The lesser problems for Tenon and their clear wood include stability, resinous heartwood and some other appearance issues such as needle fleck and conspicuous resin canals.
One interesting message was that effectively we are currently exporting much of our wood quality problem by sending the majority of the problematic logs to China for processing. Long time forestry consultant and commentator Dennis Neilson gave a mind boggling insight into the Chinese scene. China has made a huge, (though huge is a serious understatement), investment in soft- wood milling, and indeed is still investing. It is not the latest, most automated technology but rather multiple, modern saw-sets under a single roof. With markets for everything that comes out of even the roughest of logs, they can make much better use of these poorer quality logs than our domestic sawmillers. One local sawmiller gave the flip-side of this situation when he described China as the market of last resort for sawn timber. Not all proces- sors were quite as negative, but point was made. Interestingly though, Chinese efforts to move radiata pine “up-market” have had mixed results with some notable failures.
So where to with radiata pine? I am not sure, but the only clear message at the end of the workshop was the need for more research. Now where have I heard that before?
No posts yet
Disclaimer: Personal views expressed in this blog are those of the writers and do not necessarily represent those of the NZ Farm Forestry Association.